External Wall Rendering Specialists

Yorkshire Specialist Rendering Ltd is headed by two of Yorkshire’s most experienced wall rendering experts and plasterers.

The Knaresborough & Harrogate office is run by Gary Hymas.

The Malton & York office by Philip Scholefield.

Between them, they have over 50 years of time-served experience.

YSR Ltd can now bring you the 21st Century answer to external wall rendering.
Machine-applied through-colour or monocouche one-coat wall rendering using polymer or acrylic mineral renders for a higher-quality, longer lasting, faster job completion and overall a cheaper solution to external wall rendering.

Machine Sprayed Monocouche Render

We use the PFT G5, one the the most popular and easy to use multi-purpose mixing pumps. It automatically and continuously mixes and pumps most factory blended dry pre-mixed renders with water to a homogeneous ready to use wet render. With the large front wheels the hopper can be easily manoeuvred around a building site, and at only 65cm wide it will fit through most modern doorways.

As each wall rendering job is different, we select the most appropriate product from the leading render manufacturers to produce the best, high-quality result that should last up to 30 years without maintenance or painting.

External Render Finishes

Not only do monocouche , one-coat renders have the colour all the way through the render, but you can choose from a variety of different textured decorative finishes.

In addition the fine & medium scraped, float & towel smoothed and smooth & spray textured, we can use coloured aggregate for Dry Dash. Also tyrolean, smooth stucco, roughcast, pebbledash, flat rendered walls, brick rend and Ashlar Cut are available.

Monocouche Wall Rendering Colours

Shown are the 50 standard colours (over 140 available on request) in the PAREX range of Monocouche (One Coat) Mineral Renders to give a crisp, clean finish to your walls.

A website is not the best place to choose a colour, even the same colour applied with different textured finishes may look different – for the best colour selection please contact us for samples.

Monocouche Renderering

Monocouche, one-coat rendering uses a pre-mixed, cement-based with silicone or polymers added, weatherproof, breathable, cost effective through colour, internal or external rendering method, suitable for homes, offices, shops and commercial buildings.

When machine sprayed it is up to 3 times faster, saving on labour, scaffolding costs and site cleanup. The renders last up to 30 years making long term savings on not having to repaint.

For fa├žades prone to cracking, a mesh can be embedded into the wet render to provide reinforcement.

Thin Coat Acrylic Render

Thin-coat silicone and acrylic flexible renders are ideal for large buildings where ease of maintenance is important due to their self-cleaning abilities. Thin-coat acrylic and silicone renders are also applied on to external wall insulation systems and are also suited to renovation projects where substrate cracking has been an issue in the past.

Acrylics & silicone renders can be ordered & manufactured in many RAL colours.

Heritage Lime Rendering

On period properties and listed buildings when undergoing restoration and renovation, lime based renders are usually specified.

YSR have a large range of lime-based products that also come as through-coloured pre-mixed render for texture and colour consistency, speed of application and where the final finish and appearance is similar to that of monocouche renders.

Traditional Sand & Cement Render

For external wall rendering where it is not practical or undesirable to use a monocouche one coat render, YSR Ltd are fully skilled in traditional two coat rendering – a mortar consisting of cement and fine aggregate, usually together with lime or a plasticiser, which is applied to a wall surface, generally in two or more coats.

When correctly matched with the background, the hardened render provides a durable weather resistant finish that will enhance the surface of a building.

General Plastering Services

Gary Hymas and Philip Scholefield are both time-served plasters and have between them over 50 years experience, so you don’t have to ask, we can do all of the following:-

  • Plastering – Traditional 2 Coat Wet Plastering
  • Plasterboarding – Dot, Dab & Skim
  • Patching & Plaster Repairs
  • Artex Removal
  • Floor Screeding
  • Tiling
  • Coving & Cornices
  • Restoration – Lime based
  • Tanking & Damp Proofing
  • Pebbledash & All Traditional Renders
  • Commercial & Domestic Residential

Contact Us

We are mostly out on site during the day so the phone numbers below are the quickest way to contact us, if we are unable to answer, please leave a message. Thank you.

Send us an email.


YSR Ltd : Knaresborough – Harrogate
Gary Hymas : 07866 575 328
77 Aspin Lane
Knaresborough
North Yorkshire
HG5 8HP

 

YSR Ltd : Malton – York
Philip Scholefield : 07956 680 204
7 Middlecave Drive
Malton
North Yorkshire
YO17 6SQ
 
Areas Of Yorkshire Covered

With offices in Knaresborough and Malton, YSR Ltd can provide wall rendering services to residential and commercial customers in North Yorkshire, East Yorkshire and West Yorkshire, including Harrogate, Wetherby, York, Wakefield, Tadcaster, Boston Spa, Collingham, Ripon, Thirsk, Northallerton, Pontefract, Selby, Castleford, Leeds, Bradford, Otley, Whitby, Scarborough, Ilkley, Bridlington, Pickering, Easingwold, Beverly, Driffield and Hull or contact us if you are outside the Yorkshire area.

© Yorkshire Specialist Rendering Ltd

Company Number: 9082749